smaj

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • 10 May, 2020 at 10:11 am in reply to: Printing using kitchen thermal printer 72mm #48668
    smaj
    Participant

      Hi Ken, Can you please share how you sorted this. I too have a Star (80mm) printer and having the same issue. Its printing the order and about a meter of blank and at the end the page, the time and date.
      How did you get the printer to stop printing at the end of order text.

      Thanks

      12 November, 2018 at 9:39 am in reply to: Which Printer? and where to buy #40058
      smaj
      Participant

        @Silo I would recommend the Goodcom printers they are relatively easy to use after setup. You can use Wifi or sms and you can use reject/accept + give a time for delivery to orders.

        27 June, 2018 at 12:43 am in reply to: GoodCom printers #38210
        smaj
        Participant

          How have you setup your functions.php, have dont it like #35518 or have you done something diffrent?

          26 June, 2018 at 9:19 pm in reply to: GoodCom printers #38203
          smaj
          Participant

            Hi,

            I’m trying to print all the variables the actual printer sends back (order confirmation times etc). but I’m getting no output.

            Do you know what Variables I should be looking for? the default ones are not echoing.

            How do I see which page the printer is trying to actually connect to?

            24 June, 2018 at 10:55 pm in reply to: GoodCom printers #38169
            smaj
            Participant

              Hi @justin,
              Im still having difficulty callingback.
              I have the order writing to the ordercallback.php but cant get the email sent out??? i get a
              RRRR err:HTTP/1.1 500 Internal Server Error
              from the TT data.

              What is the “include_once(“getorder.php”);” what is the getorder.php?

              Thank you @Olly look forward to the addon soon.

              20 June, 2018 at 8:26 pm in reply to: GoodCom printers #38123
              smaj
              Participant

                @Oily Can we integrate the callback.php with your Confirm|Reject|Notify addon?
                ie. when user rejects an order the Confirm|Reject|Notify puts it and and refund the customer?

                20 June, 2018 at 3:34 pm in reply to: GoodCom printers #38120
                smaj
                Participant

                  I can get past the loop now, but I not getting any email confirmation after accepting the order.??

                  20 June, 2018 at 2:07 pm in reply to: GoodCom printers #38119
                  smaj
                  Participant

                    Thank you Very much for your reply.
                    Im trying to this script to work but im just getting a loop.(asks for confirmation time and printer just prints the same order. )
                    I have changed the time zone, “getorder.php” “./getorder.php”, orders.txt and the emails. Is there anything else im missing out?

                    Regards

                    20 June, 2018 at 2:54 am in reply to: GoodCom printers #38115
                    smaj
                    Participant

                      Thank you Oily!

                      @proof                       @justin how did you get the printer to callback to the website/customer? I have the ordini.txt working.

                      20 June, 2018 at 1:28 am in reply to: Add Ingredients "Special" #38111
                      smaj
                      Participant

                        I am sorry to butt in this topic. @ justin did you manage to get a callback programmed as per this post:
                        https://www.wp-pizza.com/topic/goodcom-printers/page/2/
                        If so can you explain how?

                        19 June, 2018 at 11:27 am in reply to: Goodcom Printer Setup #38065
                        smaj
                        Participant

                          ok after working on it. I have a working ordini.txt and printering orders. now after the order is accepted via the printer i get a eggtimer that dosent go away after a reboot the same order is getting printed..I think this is could be a callback fail.
                          Can Someone PLEASE help me with the CALLBACK.PHP

                          Thank you

                          15 June, 2018 at 10:21 pm in reply to: Goodcom Printer Setup #37981
                          smaj
                          Participant

                            Hi
                            Yes I have i can across this : https://www.wp-pizza.com/topic/integration-with-goodcom-wireless-order-printer/
                            but the follow up reply in hidden, and this : https://www.wp-pizza.com/topic/goodcom-printers/ but the topic is closed to new replies.

                            I have the Printer printing emailed orders fine in plain text layout is good.
                            I want to now call back to custmer order acccepted rejected..

                            I want to know which firmware they are using ie the Gc(3gpw) or Gc(5gpw),
                            what is the ordini.txt
                            do you really need to custom receipt
                            How they setup the .ini with Parmeter Update for Printer App

                            I used Gc(5grw) over wifi to get emailed prints to work
                            With Gc(3ppw) over wifi problems connecting server.

                          • Author
                            Posts
                          Viewing 12 posts - 1 through 12 (of 12 total)